rebar end upset forging machine, rebar forging machine

1. Clean the appearance of the machine body, track, head, clamping mechanism and oil tank etc.

Turn on power: before turn on power, should carefully check each operation button, whether the circuit breaker is in a closed position, after confirmation, and then supply the power.

Check rotation direction of oil pump motor

Press button “oil pump opened” to check rotation direction, the right direction has been marked on oil pump, and the rotation should be light and no noise. If rotation direction is not right, pls connect wire again.

2. Adjust machine

Press the button “Oil Crock Countermarched” and “Oil Crock Marched” to check whether direction is right or not.

The pressure value for different rebar size is as follows for your reference.